Here's a video of Thomas adding an additional chime to an existing Jacob Jensen doorbell set.
To read the transcript of this video, see below:
How’s it going today? It’s Thomas with Guardline Security, and today we’re going to be going over adding an additional chime to your existing Jacob Jensen Doorbell Set.
Since Jacob Jensen devices come paired straight from the factory, there are only a few small steps you’ll have to take to get your chime ready for use.
First, be sure to insert the included AA batteries. And second, be sure to move the volume switch from OFF, which is the factory default, to either LOW or HIGH.
If you move the dip switches in your existing Jacob Jensen doorbell, you will have to match these four dip switches to that configuration.
As always, thanks for watching, and if you have any additional questions or comments, feel free to reach out and contact us at Guardlinesecurity.com.